Main

Range of product

Altivar Process ATV600

Product or component type

Variable speed drive

Product specific application

Process and utilities

Device short name

ATV630

variant

Standard version

Product destination

Asynchronous motors
 Synchronous motors

EMC filter

Integrated with 25 m conforming to EN/IEC 61800-3 category C3

IP degree of protection

IP00 conforming to IEC 61800-5-1
 IP00 conforming to IEC 60529
 IP20 (with kit VW3A9705) conforming to IEC 61800-5-1
 IP20 (with kit VW3A9705) conforming to IEC 60529

[Us] rated supply voltage

500...690 V

Type of cooling

Forced convection

Supply frequency

50...60 Hz - 5...5 %

[Us] rated supply voltage

500...690 V - 15...10 %

Motor power kW

11 kW at 500 V (normal duty)
 7.5 kW at 500 V (heavy duty)
 15 kW at 690 V (normal duty)
 11 kW at 690 V (heavy duty)

Motor power hp

15 hp at 500 V normal duty
 10 hp at 500 V heavy duty
 20 hp at 690 V normal duty
 15 hp at 690 V heavy duty

Line current

18.4 A at 500 V (normal duty)
 19.2 A at 690 V (normal duty)
 13.6 A at 500 V (heavy duty)
 14.7 A at 690 V (heavy duty)

Prospective line Isc

70 kA

Apparent power

22.9 kVA at 690 V (normal duty)
 17.6 kVA at 690 V (heavy duty)

Continuous output current

18 A at 4 kHz for normal duty
 13.5 A at 4 kHz for heavy duty

Maximum transient current

19.8 A during 60 s (normal duty)
 20.3 A during 60 s (heavy duty)

Asynchronous motor control profile

Optimized torque mode
 Constant torque standard
 Variable torque standard

Synchronous motor control profile

Permanent magnet motor
 Synchronous reluctance motor

Speed drive output frequency

0.1…500 Hz

Nominal switching frequency

4 kHz

Switching frequency

2...8 kHz adjustable
 4...8 kHz with derating factor

Safety function

STO (safe torque off) SIL 3

Discrete input logic

16 preset speeds

Communication port protocol

Modbus TCP
 Ethernet
 Modbus serial

Option card

Slot A: communication module, Profibus DP V1
 Slot A: communication module, PROFINET
 Slot A: communication module, DeviceNet
 Slot A: communication module, Modbus TCP/EtherNet/IP
 Slot A: communication module, CANopen daisy chain RJ45
 Slot A: communication module, CANopen SUB-D 9
 Slot A: communication module, CANopen screw terminals
 Slot A/slot B: digital and analog I/O extension module
 Slot A/slot B: output relay extension module
 Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
 Communication module, BACnet MS/TP
 Communication module, Ethernet Powerlink

Complementary

Mounting mode

Wall mount

Network number of phases

3 phases

Discrete output number

0

Discrete output type

Relay outputs R1A, R1B, R1C 250 V AC 3000 mA
 Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
 Relay outputs R2A, R2C 250 V AC 5000 mA
 Relay outputs R2A, R2C 30 V DC 5000 mA
 Relay outputs R3A, R3C 250 V AC 5000 mA
 Relay outputs R3A, R3C 30 V DC 5000 mA

Output voltage

<= power supply voltage

Permissible temporary current boost

1.1 x In during 60 s (normal duty)
 1.5 x In during 60 s (heavy duty)

Motor slip compensation

Not available in permanent magnet motor law
 Can be suppressed
 Automatic whatever the load
 Adjustable

Acceleration and deceleration ramps

S, U or customized
 Linear adjustable separately from 0.01...9999 s

Physical interface

Ethernet
 2-wire RS 485

Braking to standstill

By DC injection

Protection type

Thermal protection: motor
 Safe torque off: motor
 Motor phase break: motor
 Thermal protection: drive
 Safe torque off: drive
 Overheating: drive
 Overcurrent between output phases and earth: drive
 Overload of output voltage: drive
 Short-circuit protection: drive
 Motor phase break: drive
 Overvoltages on the DC bus: drive
 Line supply overvoltage: drive
 Line supply undervoltage: drive
 Line supply phase loss: drive
 Overspeed: drive
 Break on the control circuit: drive

Transmission rate

10, 100 Mbits
 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

Frequency resolution

Display unit: 0.1 Hz
 Analog input: 0.012/50 Hz

Transmission frame

RTU

Electrical connection

Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16
 Motor: screw terminal 6...10 mm²/AWG 10...AWG 8
 Line side: screw terminal 6...10 mm²/AWG 10...AWG 8

Connector type

RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
 RJ45 (on the remote graphic terminal) for Modbus serial

Data format

8 bits, configurable odd, even or no parity

type of polarization

No impedance

Exchange mode

Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Number of addresses

1…247 for Modbus serial

Method of access

Slave Modbus TCP

Supply

External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
 Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
 Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection

Local signalling

3 LEDs for local diagnostic
 3 LEDs (dual colour) for embedded communication status
 4 LEDs (dual colour) for communication module status
 1 LED (red) for presence of voltage

Width

246 mm

Height

420 mm

Depth

242 mm

Net weight

22 kg

Analogue input number

3

Analogue input type

AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
 AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
 AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits

Discrete input number

8

Discrete input type

DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)

Input compatibility

DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
 DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
 STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2

Discrete input logic

Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)
 Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)

Analogue output number

2

Analogue output type

Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
 Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
 Software-configurable current DQ-, DQ+: 30 V DC
 Software-configurable current DQ-, DQ+: 100 mA

Sampling duration

2 ms +/- 0.5 ms (DI1...DI4) - discrete input
 5 ms +/- 1 ms (DI5, DI6) - discrete input
 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
 10 ms +/- 1 ms (AO1) - analog output

Accuracy

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
 +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output

Linearity error

AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
 AO1, AO2: +/- 0.2 % for analog output

Relay output number

3

Relay output type

Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
 Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
 Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles

Refresh time

Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)

Minimum switching current

Relay output R1, R2, R3: 5 mA at 24 V DC

Maximum switching current

Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
 Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
 Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
 Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC

Isolation

Between power and control terminals

Maximum output frequency

500 kHz

Maximum input current

19.2 A

Quantity per set

1

Enclosure mounting

Wall mounted

Environment

Insulation resistance

> 1 MOhm 500 V DC for 1 minute to earth

Noise level

52 dB conforming to 86/188/EEC

Power dissipation in W

Natural convection: 110 W at 500 V, switching frequency 4 kHz
 Forced convection: 271 W at 500 V, switching frequency 4 kHz

Volume of cooling air

330 m3/h

operating position

Vertical +/- 10 degree

Maximum THDI

<48 % with external line choke conforming to IEC 61000-3-12

Electromagnetic compatibility

Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6

Pollution degree

2 conforming to EN/IEC 61800-5-1

Vibration resistance

1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to IEC 60068-2-27

Relative humidity

5…95 % without condensation conforming to IEC 60068-2-3

Ambient air temperature for operation

-15…50 °C (without derating)
 50…60 °C (with derating factor)

Ambient air temperature for storage

-40…70 °C

Operating altitude

<= 1000 m without derating
 1000...4800 m with current derating 1 % per 100 m

Standards

UL 508C
 EN/IEC 61800-3
 Environment 2 category C3 EN/IEC 61800-3
 EN/IEC 61800-5-1
 IEC 61000-3-12
 IEC 60721-3
 IEC 61508
 IEC 13849-1

Product certifications

CSA
 TÜV
 UL

Marking

CE

Standards

UL 508C
 EN/IEC 61800-3
 EN/IEC 61800-3 environment 2 category C3
 EN/IEC 61800-5-1
 IEC 61000-3-12
 IEC 60721-3
 IEC 61508
 IEC 13849-1

Overvoltage category

III

Regulation loop

Adjustable PID regulator

noise level

58 dB

Pollution degree

2

Packing Units

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

24.2 cm

Package 1 Width

24.6 cm

Package 1 Length

42.0 cm

Package 1 Weight

21.0 kg