This Altivar 312 3-phase variable speed drive has a rated power of 11kW, 25kVA, and a 380V to 500V AC rated output voltage. It is suitable for industrial machines such as materials handling and packaging, packing, textile machines, special machines, pumps and fans. It has a compact form-factor with 245mm width, allowing for a flexible and easy installation on a mounting plate. It also offers a snap-lock seal, status and faults display, a jog dial navigation button and an integrated EMC filter. It offers high readability of key parameters thanks to a bright LED 4-digit display. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime.
Main | |
Range of product | Altivar 312 |
Product or component type | Variable speed drive |
Product destination | Asynchronous motors |
Product specific application | Simple machine |
Assembly style | With heat sink |
Component name | ATV312 |
Motor power kW | 11 kW |
Motor power hp | 15 hp |
[Us] rated supply voltage | 380...500 V - 15...10 % |
Supply frequency | 50...60 Hz - 5...5 % |
Network number of phases | 3 phases |
Line current | 37.2 A at 380 V, Isc = 22 kA |
EMC filter | Integrated |
Apparent power | 25 kVA |
Maximum transient current | 41.6 A for 60 s |
Power dissipation in W | 397 W at nominal load |
Speed range | 1…50 |
Asynchronous motor control profile | Factory set : constant torque |
Electrical connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14 |
Supply | Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection |
Communication port protocol | Modbus |
IP degree of protection | IP20 on upper part without cover plate |
Option card | Communication card for CANopen daisy chain |
Complementary | |
Supply voltage limits | 323…550 V |
Prospective line Isc | 22 kA |
Continuous output current | 27.7 A at 4 kHz |
Output frequency | 0…500 Hz |
Nominal switching frequency | 4 kHz |
Switching frequency | 2...16 kHz adjustable |
Transient overtorque | 170…200 % of nominal motor torque |
Braking torque | 150 % during 60 s with braking resistor |
Regulation loop | Frequency PI regulator |
Motor slip compensation | Suppressable |
Output voltage | <= power supply voltage |
Tightening torque | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6 N.m |
Insulation | Electrical between power and control |
Analogue input number | 3 |
Analogue input type | AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm |
Sampling duration | AI1, AI2, AI3: 8 ms analog |
Response time | AOV, AOC 8 ms for analog |
Linearity error | +/- 0.2 % for output |
Analogue output number | 1 |
Analogue output type | AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits |
Discrete input logic | Logic input not wired (LI1...LI4), < 13 V (state 1) |
Discrete output number | 2 |
Discrete output type | Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles |
Minimum switching current | R1-R2 10 mA at 5 V DC |
Maximum switching current | R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms |
Discrete input number | 6 |
Discrete input type | (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm |
Acceleration and deceleration ramps | Linear adjustable separately from 0.1 to 999.9 s |
Braking to standstill | By DC injection |
Protection type | Input phase breaks: drive |
Insulation resistance | >= 500 mOhm 500 V DC for 1 minute |
Local signalling | 1 LED (red) for drive voltage |
Time constant | 5 ms for reference change |
Frequency resolution | Analog input: 0.1...100 Hz |
Connector type | 1 RJ45 for Modbus/CANopen |
Physical interface | RS485 multidrop serial link |
Transmission frame | RTU |
Transmission rate | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen |
Number of addresses | 1…127 for CANopen |
Number of drive | 127 for CANopen |
Marking | CE |
operating position | Vertical +/- 10 degree |
Outer dimension | 555 x 234 x 268 mm |
Height | 329.5 mm |
Width | 245 mm |
Depth | 192 mm |
Net weight | 11 kg |
Environment | |
Dielectric strength | 2410 V DC between earth and power terminals |
Electromagnetic compatibility | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 |
Standards | IEC 61800-5-1 |
Product certifications | UL |
Pollution degree | 2 |
Protective treatment | TC |
Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 |
Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3 |
Ambient air temperature for storage | -25…70 °C |
Ambient air temperature for operation | -10…50 °C without derating (with protective cover on top of the drive) |
Operating altitude | <= 1000 m without derating |
Packing Units | |
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Height | 28.0 cm |
Package 1 Width | 30.0 cm |
Package 1 Length | 38.5 cm |
Package 1 Weight | 11.755 kg |
Unit Type of Package 2 | P06 |
Number of Units in Package 2 | 4 |
Package 2 Height | 80.0 cm |
Package 2 Width | 80.0 cm |
Package 2 Length | 60.0 cm |
Package 2 Weight | 60.02 kg |
Contractual warranty | |
Warranty | 18 months |
Powered by Froala Editor
COMPANY INTRODUCTION
Servon Engineering is a multi-dimensional organization focused on low and medium voltage electrical components and associated services. The success of our business lies in our highly qualified and talented team of engineers, who are trained in accordance with the best industrial practices. The expertise demonstrated by our specialists enables us to provide solutions that are more competitive and reliable. From low voltage components to the most specialized engineering components, our sourcing team works 24/7 to fulfill your requirements in the minimum possible time.
INFORMATION
CONTACT US
Lahore,Pakistan
sales@servonengg.com
+92301-8435040
FOLLOW US